Cold electric hand

2013-07-05 11:57:19

Author Bin

After winter, Hanqixiren, Mount faithful car will feel bitter, stiff hands numb. For cold, is hidden epithelial gloves, although the degree of ease cold hands, but thick and stupid glove reduces operating flexibility and quasi-looking, making driving more than Nagisa inconvenience, affecting traffic safety. To solve the problem of cold hands, I tried the car left and right hand on the heating wire is wound, plug in the power, the test is better. Ten times after effective design, testing and improving, a more practical. Heated handle one was born. It can be used for a variety of motorcycles, tractors, Pat is now applied for a patent for utility model. Circuit shown in Figure l, Figure 2.

This. Heated handle "disheartened by the control switch, electric wire, rubber sheath etc. One ju control switch, rubber sheath is dedicated non-standard parts. Thermostat with high temperature". Off "," Low "three block for different seasons. Figure 1 circuit for JH70, CY80, NF125, CJs0, 750,250, etc. without dividing resistor circuit installation circuit in Figure 2 for AX100, JH12s etc. circuit installation with the value of the metal wire heating device is a motorcycle magneto electricity (lighting coil) supply.

Kidney with a leather or synthetic plastics made longer support belt. It is wide in the middle, both ends of a narrow and a belt buckle, buckles and other coupling devices. As shown, the support belt 1 is fixed to metal wire heating device 4. Metal heating device endpoint 5 pieces through a suspected anti-Larsson 7 6 and the connecting cable is connected to the other end of the cable with the plug 8. Lin received enough cable length in order to insert the socket on the motorcycle when the driver when seated long enough. Socket, you should consider the driver to get off, it's easy prolapse outlet to avoid possible danger.

Kidney with the inner fabric layer 10 is a thin metal wire heating device by the IO package carrier layer 3, the fabric layer with a small thermal coefficient l metal wire heating means the other side of the plastic foam insulating layer 2. It has a high thermal resistance. The heat insulating layer and the support layer not indicated in the figure there is a heat reflecting layer which is metallised film or foil made of a metal. Kidney with the middle part, there are two symmetrical to the center line basis arched shape, and there with a metal wire heating devices. From the middle part to two, are presented two rectangles, on which there are two small tool bag 9, respectively, the outer end buckles and belts, in order to link up with the kidney.

LoginName:
Password:
Verification: