Hebei Huali Machinery Company produces hand handwheel, knob, bakelite hand wheel, hinge, chain, handgrip, button and other Machine Tool Accessory,Tel 0318-2222299
Sign in  |  Register
河北华利机械配件有限公司

On the motorcycle handle with PVC pellets production technology

2013-07-19 15:38:58

 Yibin Tianyuan Co., Ltd. Hu Shunhui

 
    Abstract PVC resin, plasticizer, stabilizer, lubricant, a colorant manufacturing motorcycle handle with pellets, the tensile strength is greater than lOMPa, big 250% elongation at break. Hardness (HA) 50, to replace the rubber material
 
Making motorcycle handles.
 
Foreword
 
    At present, China's motorcycle industry is at a faster rate, the higher the level of forward, motorcycle itself as a means of transport, and the whole social life of the people is playing an increasingly important role. Increasing year by year in the use of motorcycles and constantly updating modification, requiring motorcycle with good performance and significant economic benefits.
 
    Motorcycle handle is made of rubber material in the past, because of its complexity making process, resource shortages, higher raw material costs and difficult to adapt to the modern needs of the development. To polyvinyl chloride (PVC) as the main raw material to produce motorcycle handle pellets as raw material production to replace the rubber handle, expanded PVC plastic products, applications, and has formed a trend. Production technology to do the following in respect of an introduction.
 
A production of some
 
1.1 Process conditions
 
    The motorcycle handle 'requirements, must have a good tensile strength, elongation at break and low hardness. To this end, we use cheap PVC resin as the main raw Branch, add soft plasticizer, after kneading extrusion granulation process route, the production of pellets by the plastics injection molding, so that the performance of products reached motorcycle handle mechanical properties requirements.
 
    a, the basic formula products (see Table 1)
 
2 Product Performance
 
2.2 affect product performance analysis
 
    In the production process, we believe that the main factor affecting performance is the amount of plasticizer is added, the performance of the product in the user specifically requested HA50 less hardness, so we measured the production of plasticizers strict to ensure that the final product softness. Also, consider in the design of products, light recipe, antioxidant and other aging properties, improve the overall performance of the product.
 
    Four conclusions
 
    We use PVC pellets produced motorcycle handle fully meets user requirements, you can replace the rubber material, with this handle pellets articles made with soft, high strength, low cost and simple production process, etc., there are certain economic and social benefits,