How to maintain the food pipeline equipment bearing

No regular cleaning and maintenance of housing, will accumulate a lot of dust, dirt, dust and the dirt will be transported during the production operation, will not only have a very big noise, but also affect the lubricating properties of the bearing housing, as well as affect the forming a lubricating film of grease will cause accelerated deterioration with aging, thereby affecting lubrication grease down. Therefore, the cleanliness of the bearing, it will seriously affect the level of bearing vibration, especially the high-frequency vibrations with more significant, therefore, food delivery equipment should be the orderly conduct of a comprehensive long-term maintenance.

Bearing is one of the more important parts Food delivery device, as long as the subject is not the role of friction, tension with the inertia force and other mechanical stress, and also subject to certain lubricants, lubricant additives or products of aging, organic solvents or cooling chemical agent generated by the impact. In the daily operations of the production of the food industry enterprises, in order to better use of the bearing, it is necessary for bearing regular maintenance and cleaning. At the time of the bearing for maintenance cleaning, need to pay attention, there are many, not just to pick up some cleaning detergent can of fix will cause damage to the cleaning of the bearing, so the correct maintenance cleaning It is also very necessary.

When the food production transfer operations bearing finished running, the power supply should be turned off food delivery device, in order to avoid unnecessary accidents. The bearing remove the detector when the first good appearance record with photography and other means. In addition, be sure the remaining amount of lubricant and lubricant sampling, and then cleaning bearings. Clean bearing maintenance sub rough wash with fine wash suspended, and at the bottom of the container used in the metal grid. Coarse wash, brush the top of the oil and other clean grease or sticky materials. At this point if the migration shift in oil bearing, note blend rolling surface damage due to foreign objects; sperm washing, in the oil slowly migrate transition bearings shall be hard to suspend. Cleaner for daily use neutral water-free diesel or oil, according to the demand sometimes use warm lye. No matter what kind of cleaning agents to use, clean filter should always be confrontation. After cleaning, immediately rust coating on the bearing oil or antirust grease.