Loom hand wheel puller

Loom handwheel DSY, mounted on a curved shaft F38Y, handwheel end close and crooked wheel DllB distance. When removing the handwheel, now generally use the rod from the wall hole punch bracing handwheel end, one person stays steady rush stick, and the other one with 8 pounds demolition hammer percussion, very convenient, but also in the process of knocking the wall by the earthquake, the handwheel often hit damage. In response to these problems, we designed a loom hand wheel puller. Hand wheel puller with Puller work on the same principle, which lies at the unique eccentric claw claw 1. Removing 2:00 loom hand wheel, a little loose ends of the nut 3 jaw, jaw twist outward along three ribs between the handwheel hand wheel toward the roots, then the reverse 1800 each jaw, jaw hook that is seize the hand wheel ends and tighten three nuts 3 to 4 shall be on the loose nut, and then tighten the screw inside adjustable wrench 5, will remove the hand wheel.