Homemade Glass Handle

2013-07-04 15:26:04

Formerly ordinary woodworking sanding machine. When in use, the hands of the operator to continuously move the slide axially and radial movement and the pressure pad, physical exertion. Now the original machine to install magnetic device, reduce labor intensity, processing quality and also meet requirements. Its working principle is:

L via the main motor driven drum with a sand f 2,10 with the primary campaign; grinding 11f with the car 12 through the motor and gearbox 8 9fI the chain transfer operation 3,1 7 reciprocate; according to the workpiece size, car trip lever mounted on the guide can be axially adjustable to control the switching 4,6; grinding operation of the traction solenoid 11 by the link mechanism 5 is completed.

When making a glass sliding door bookcase or food cupboard, decorative cabinet, the regulation may be in a big city

Grid with hands dug into the groove with a glass door, fitted perfectly into a cupboard. But in general, the

Small cities, especially in the county, it is difficult to be assigned to such a glass. To this end, the author has used glass and glass bonding methods were tested, after years of use, is still intact without removal.

Materials: 1) lOmm so wide,2-3mm thick,50-60mm long glass side leg pieces.

2) do not dilute over polyvinyl acetate emulsion (white glue).

Production: with gravel (preferably stone) plus four weeks flute glass strip mill to corner, and put adhesive surface sanding, followed by dry cleaned. Bonding glass door handle while the site also wipe dry. Finally, the glass surface coated with a layer of white glue hair, stick on the sliding door glass, pressed firmly back and forth several times, depending on the glass layer without glue bubbles Serve. Flat one day after drying can be used.

Hefei Institute of Wang Thai Furniture Industries

LoginName:
Password:
Verification: